A friend of mine bought me a coat of asphalt impounded fiberboard from an online retailer, and it turned out to be a great choice for a new roof that’s a little more reflective than the typical roof.
The problem with asphalt imported fiberboard is that the paint is too thin, making it hard to paint on any surface.
If I want to paint my roof with asphalt, I need to get a little bit of thickness to it.
That’s where aluminum foil comes in.
The trick to making aluminum foil is that it is a flexible material that allows it to absorb light and hold it up.
That is important because if I use aluminum foil to paint the surface of my roof, I’ll have a hard time painting on anything other than the top of the roof.
That means my paint job won’t look good.
Instead, I want it to be able to absorb some light and make the paint reflect off the reflective surface.
This is why aluminum foil can be used on a reflective surface such as the top or bottom of a roof.
It will absorb some of the light, then it will reflect that light back onto the reflective area to give me a nice reflective effect.
Here’s what I did to paint an aluminum foil roof.
First, I sprayed aluminum foil onto the underside of the aluminum foil.
I found that if you spray aluminum foil on the underside, you will have to reapply it to get it to work properly.
I sprayed it twice on the inside of the foil to make sure it worked well.
Second, I used a spray bottle to apply aluminum foil into a circle.
This allowed me to apply a little spray onto the aluminum, so I had enough spray for the first coat of paint.
I then sprayed the second coat of aluminum foil over the first, then applied the last coat of foil on top of it.
Once it was dry, I applied a coat or two of aluminum oxide onto the inside.
Here’s what that look like.
That’s all there is to it!
I applied the first and second coats of aluminum on the bottom of the insulation, and then on the top and bottom of it, then finished off with the third coat of the same material on top.
This method was easy to do.
I was able to paint with the paint that was applied to the inside and the outside of the reflective foil, and all I had to do was to let the aluminum sit for a few minutes, then reapply the paint.
The paint looked pretty good, and the paint stuck to the aluminum perfectly.
I used the aluminum oxide coat for my first coat, and I think that it was really effective.
I really like the look of the coat because it gives a really nice, reflective effect to the entire roof.
As I paint on the roof, the reflective layer absorbs the light from the sun and reflects it back onto itself.
If the reflective coat isn’t painted well, it will be too reflective and I’ll end up with a cloudy, dark finish.
That may not bother you, but it’s not as nice as the clear coat that you get with a reflective roof.
If you’re looking to buy a reflective aluminum roof, check out this video that shows how to paint it.